Production Equip - Abrasives - Grinding Stones

Description The Norton Grinding Wheel - 8" x 2" x 4" has a diameter of 8” and is 2” thick. The Type 2, 4500 RPM grinding wheel is mounted on a...

Rail grinding is a key component to track maintenance. This Norton 6” x 1” x 5/8” Type 1 Grinding Wheel has been designed specifically for th...

Norton's 10" inch diameter by 1-1/4" thick with 1" arbor hole. Recessed on one side. Type 5. 3630 RPM grinding wheel.

The 8" x 1" x 3/4" Grinding Wheel is a Type 1 Norton stone. It is 8 inches in diameter by 1 inch thick with a ¾ inch arbor hole, and is a 600...

Description This Norton Abrasive Plug is 2” x 3” x 5/8" with an 11-threaded arbor hole. Also known as a Bull Nose Grinding Stone, this abrasiv...

The Norton Grinding Wheel – 4” x 3” x 5/8” – 11 is a Type 6 wheel and is 8120 RPM. This wheel is used for frog profile grinding to remove any...

Norton 6"/4-3/4" diameter by 2" thick with 5/8"-11 threaded arbor hole. Type 11. 6000 RPM grinding wheel.

Description This Bolt Hole Kit from Industry-Railway Suppliers comes with everything you need to grind, shape, and finish bolt holes in rail and...

Description Norton's 8" diameter by 3/16" thick with 5/8" arbor hole. Type 1. 7640 RPM slotting wheel. U57A244-TB25N

This Norton 8” x 2” grinding stone with 1” arbor hole is used for rail head-wash grinding in preparation for a head-wash weld. This grinding ...

Norton's 8" diameter by 1" thick with 1" arbor hole. Supplied with C1 nested bushing. Type 1. 3600 RPM. Grinding wheel for redressing of trac...