Tools - Signals & Comms - Tools

Description Four-piece, double-end switch adjusting wrench set. One end at 67 degrees, one end at 15 degrees.

Description 4-1/2” overall length insulated terminal wrench for AAR 1/2" nuts.

Description Cribbing tool is used to safely maneuver ballast beneath rail and ties.

Description 4" trim length lube brush with Tampico bristles and 36" long handle for use in applying switch lubricants.

Description 1-1/2" trim length lube brush with Tampico bristles and 36" long handle for use in applying switch lubricants.

Description 12-ounce Slip Plate aerosol dry film lubricant. 12 cans per case. Priced by the can. 12 cans per case. Must purchase in multiples of...

Description 1" by 1-1/8" bolt size double end track wrench 48" long, 1-11/16" and 1-7/8" jaw opening for 1-5/8" and 1-13/16" nut width. To AREMA...

Description 1-1/8" by 1-1/4" bolt size double-end track wrench, 48" long, 1-7/8" and 2-1/16" jaw opening for 1-13/16" and 2" nut width. To AREMA...

Description 2-gallon pump sprayer comes with 36" hose and wand. Shop this polypropylene plastic Chapin lawn and garden sprayer from Industry-R...

Description Slot socket with 1" square drive for use with switch stands.

Description 3-gallon pump sprayer comes with 36" hose and wand. Shop this polypropylene plastic Chapin lawn and garden sprayer from Industry-R...

Description Holder for suspending hydraulic tools in place on railcars and work trucks. 

Description 2" by 7/8" by 3-3/4" male end and 7-1/2" overall with 1" square drive for adjusting connecting rods.

Description 1-1/4" bolt size single-end track wrench, 48" long with 2-1/16" jaw opening for 2" nut width. To AREMA plan #4 latest revision.

Description Step and seat for usage with truck tailgate or truck bed, 2 steps. Comes complete with extra handle.